Support Board
Date/Time: Thu, 03 Jul 2025 08:48:58 +0000
Post From: poc
| [2025-07-02 15:16:15] |
| John - SC Support - Posts: 40722 |
|
Everything is fine with the chartbook when we look at it. Every instance in which the POC is at the Low or 1 or 2 ticks above are colored correctly. The only thing we can see is that you have the "Color Bar Based on Alert Condition" set to color 50000 bars. We wonder if that bar that is not showing correctly is one bar back from that (i.e. bar 50001 back from the end of the chart). Admittedly, 50000 bars is a lot, and is more than is loaded in the chart you sent us. But from the setup you have, it would be the only reason for an issue. We do want to point out that there is an easier way to do what you want with a single Color Bar Based on Alert Condition. It will not make any difference in the results, it just eliminates two other studies from your chart. To do this, do the following: - Remove two of the "Color Bar Based on Alert Condition Studies". - On the remaining study, enter the following for the alert condition: =OR(ID3.SG1 = L, ID3.SG1 = L + TICKSIZE, ID3.SG1 = L + TICKSIZE * 2) - Change the "Based On" to be the "Volume Point of Control for Bars" study. - Change the "Input Data" to "VPOC". - Set "Draw Style Percentage/Ticks Offset" to "0". For the most reliable, advanced, and zero cost futures order routing, use the Teton service: Sierra Chart Teton Futures Order Routing |