Support Board
Date/Time: Mon, 27 Oct 2025 12:27:10 +0000
Post From: Data not loading in correctly
| [2025-10-08 17:46:49] |
| User415279 - Posts: 3 |
|
I have closed my system down, last message in my log is at 13:27:23, so I will not show anything for the 9:30 open. What you will see in the pictures attached in previous message is as follows. I have a high/low for time period extended. It populates the high/low for the first 30 seconds and the opening print. The H/L are in black, and the opening print in orange. The correct data is as follows: ES: 6774.25 High, 6772.25 Low, 6773.25 opening print. NQ: 25091.75 high, 25074 low, 25079.75 opening print, this populated on the SC data correctly. On the CQG webapi it populated as follows off the open: ES: 6774 high, 6773.25 low, 6772.75 opening print. NQ: 25085 high, 25079.75 low, 25119.00 opening print. System froze on the open, then had to disconnect and reconnect for feed to come back, but did not have any of the right data. I have fixed it by deleting and redownloading that data now, but I was wondering why it happened and how to avoid this issue in the future?
Date Time Of Last Edit: 2025-10-08 17:47:19
|