#include "sierrachart.h" #include #include #include #include SCDLLName("FairValueGap") const SCString ContactInformation = "gcUserStudies"; /*============================================================================== This study is for drawing FVG's (Fair Value Gaps) ------------------------------------------------------------------------------*/ SCSFExport scsf_gcFairValueGap(SCStudyInterfaceRef sc) { enum Subgraph { FVGUpCount , FVGDnCount , FVGUp_01_H , FVGUp_01_L , FVGUp_02_H , FVGUp_02_L , FVGUp_03_H , FVGUp_03_L , FVGUp_04_H , FVGUp_04_L , FVGUp_05_H , FVGUp_05_L , FVGUp_06_H , FVGUp_06_L , FVGUp_07_H , FVGUp_07_L , FVGUp_08_H , FVGUp_08_L , FVGUp_09_H , FVGUp_09_L , FVGUp_10_H , FVGUp_10_L , FVGUp_11_H , FVGUp_11_L , FVGUp_12_H , FVGUp_12_L , FVGUp_13_H , FVGUp_13_L , FVGUp_14_H , FVGUp_14_L , FVGDn_01_H , FVGDn_01_L , FVGDn_02_H , FVGDn_02_L , FVGDn_03_H , FVGDn_03_L , FVGDn_04_H , FVGDn_04_L , FVGDn_05_H , FVGDn_05_L , FVGDn_06_H , FVGDn_06_L , FVGDn_07_H , FVGDn_07_L , FVGDn_08_H , FVGDn_08_L , FVGDn_09_H , FVGDn_09_L , FVGDn_10_H , FVGDn_10_L , FVGDn_11_H , FVGDn_11_L , FVGDn_12_H , FVGDn_12_L , FVGDn_13_H , FVGDn_13_L , FVGDn_14_H , FVGDn_14_L }; // Input Index int SCInputIndex = 0; // FVG Up Settings SCInputRef Input_FVGUpEnabled = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpLineWidth = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpLineStyle = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpLineColor = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpFillColor = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpTransparencyLevel = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpDrawMidline = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpExtendRight = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpHideWhenFilled = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpAllowCopyToOtherCharts = sc.Input[SCInputIndex++]; SCInputRef Input_FVGUpMinGapSizeInTicks = sc.Input[SCInputIndex++]; // FVG Down Settings SCInputRef Input_FVGDnEnabled = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnLineWidth = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnLineStyle = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnLineColor = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnFillColor = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnTransparencyLevel = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnDrawMidline = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnExtendRight = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnHideWhenFilled = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnAllowCopyToOtherCharts = sc.Input[SCInputIndex++]; SCInputRef Input_FVGDnMinGapSizeInTicks = sc.Input[SCInputIndex++]; // General Settings SCInputRef Input_FVGMaxBarLookback = sc.Input[SCInputIndex++]; SCInputRef Input_ToggleSubgraphs = sc.Input[SCInputIndex++]; // Tick Size for Subgraphs - For trailing stops/targets/etc... SCInputRef Input_SubgraphFVGUpMinGapSizeInTicks = sc.Input[SCInputIndex++]; SCInputRef Input_SubgraphFVGDnMinGapSizeInTicks = sc.Input[SCInputIndex++]; // Input Graph used to feed 3rd candle of FVG to determine if FVG is drawn or not SCInputRef Input_UseAdditionalFVGCandleData = sc.Input[SCInputIndex++]; SCInputRef Input_AdditionalFVGCandleData = sc.Input[SCInputIndex++]; const int MIN_START_INDEX = 2; // Need at least 3 bars [0,1,2] struct FVGRectangle { int LineNumber; int ToolBeginIndex; float ToolBeginValue; int ToolEndIndex; float ToolEndValue; bool FVGEnded; bool FVGUp; // If not up, then it's down unsigned int AddAsUserDrawnDrawing; }; struct HLForBarIndex { int Index; float High; float Low; }; // Structs for FVG's and Bar High/Low/Index Data std::vector* FVGRectangles = reinterpret_cast*>(sc.GetPersistentPointer(0)); std::vector HLForBarIndexes; // Tool Line Unique Number Start Point int UniqueLineNumber = 8675309; // Jenny Jenny! if (sc.SetDefaults) { sc.GraphName = "GC: Fair Value Gap"; SCString StudyDescription; StudyDescription.Format("%s by %s", sc.GraphName.GetChars(), ContactInformation.GetChars()); sc.StudyDescription = StudyDescription.AppendFormat( "

This Study Draws ICT Fair Value Gaps" ); sc.GraphRegion = 0; sc.AutoLoop = 0; sc.CalculationPrecedence = LOW_PREC_LEVEL; // Needed for addional study inputs... // FVG Up Input_FVGUpEnabled.Name = "FVG Up: Enabled"; Input_FVGUpEnabled.SetDescription("Draw FVG Up Gaps"); Input_FVGUpEnabled.SetYesNo(1); Input_FVGUpLineWidth.Name = "FVG Up: Line Width"; Input_FVGUpLineWidth.SetDescription("Width of FVG Rectangle Border"); Input_FVGUpLineWidth.SetInt(1); Input_FVGUpLineStyle.Name = "FVG Up: Line Style"; Input_FVGUpLineStyle.SetDescription("Style of FVG Rectangle Border"); Input_FVGUpLineStyle.SetCustomInputStrings("Solid; Dash; Dot; Dash-Dot; Dash-Dot-Dot; Alternate"); Input_FVGUpLineStyle.SetCustomInputIndex(0); Input_FVGUpLineColor.Name = "FVG Up: Line Color"; Input_FVGUpLineColor.SetColor(RGB(13, 166, 240)); Input_FVGUpLineColor.SetDescription("Color of FVG Rectangle Border"); Input_FVGUpFillColor.Name = "FVG Up: Fill Color"; Input_FVGUpFillColor.SetDescription("Fill Color Used for FVG Rectangle"); Input_FVGUpFillColor.SetColor(RGB(13, 166, 240)); Input_FVGUpTransparencyLevel.Name = "FVG Up: Transparency Level"; Input_FVGUpTransparencyLevel.SetDescription("Transparency Level for FVG Rectangle Fill"); Input_FVGUpTransparencyLevel.SetInt(65); Input_FVGUpTransparencyLevel.SetIntLimits(0, 100); Input_FVGUpDrawMidline.Name = "FVG Up: Draw Midline (Set Line Width to 1 or Higher)"; Input_FVGUpDrawMidline.SetDescription("Draw Midline for FVG Rectangle. Requires Line Width of 1 or Higher."); Input_FVGUpDrawMidline.SetYesNo(0); Input_FVGUpExtendRight.Name = "FVG Up: Extend Right"; Input_FVGUpExtendRight.SetDescription("Extend FVG Rectangle to Right of Chart Until Filled"); Input_FVGUpExtendRight.SetYesNo(1); Input_FVGUpHideWhenFilled.Name = "FVG Up: Hide When Filled"; Input_FVGUpHideWhenFilled.SetDescription("Hide FVG Rectangle when Gap is Filled"); Input_FVGUpHideWhenFilled.SetYesNo(1); Input_FVGUpAllowCopyToOtherCharts.Name = "FVG Up: Allow Copy To Other Charts"; Input_FVGUpAllowCopyToOtherCharts.SetDescription("Allow the FVG Rectangles to be Copied to Other Charts"); Input_FVGUpAllowCopyToOtherCharts.SetYesNo(1); Input_FVGUpMinGapSizeInTicks.Name = "FVG Up: Minimum Gap Size in Ticks"; Input_FVGUpMinGapSizeInTicks.SetDescription("Only Process Gaps if greater or equal to Specified Gap Size"); Input_FVGUpMinGapSizeInTicks.SetInt(1); Input_FVGUpMinGapSizeInTicks.SetIntLimits(1, INT_MAX); // FVG Down Input_FVGDnEnabled.Name = "FVG Down: Enabled"; Input_FVGDnEnabled.SetDescription("Draw FVG Down Gaps"); Input_FVGDnEnabled.SetYesNo(1); Input_FVGDnLineWidth.Name = "FVG Down: Line Width"; Input_FVGDnLineWidth.SetDescription("Width of Rectangle Border"); Input_FVGDnLineWidth.SetInt(1); Input_FVGDnLineStyle.Name = "FVG Down: Line Style"; Input_FVGDnLineStyle.SetDescription("Style of FVG Rectangle Border"); Input_FVGDnLineStyle.SetCustomInputStrings("Solid; Dash; Dot; Dash-Dot; Dash-Dot-Dot; Alternate"); Input_FVGDnLineStyle.SetCustomInputIndex(0); Input_FVGDnLineColor.Name = "FVG Down: Line Color"; Input_FVGDnLineColor.SetDescription("Color of Rectangle Border"); Input_FVGDnLineColor.SetColor(RGB(255, 128, 128)); Input_FVGDnFillColor.Name = "FVG Down: Fill Color"; Input_FVGDnFillColor.SetDescription("Fill Color Used for Rectangle"); Input_FVGDnFillColor.SetColor(RGB(255, 128, 128)); Input_FVGDnTransparencyLevel.Name = "FVG Down: Transparency Level"; Input_FVGDnTransparencyLevel.SetDescription("Transparency Level for Rectangle Fill"); Input_FVGDnTransparencyLevel.SetInt(65); Input_FVGDnTransparencyLevel.SetIntLimits(0, 100); Input_FVGDnDrawMidline.Name = "FVG Down: Draw Midline (Set Line Width to 1 or Higher)"; Input_FVGDnDrawMidline.SetDescription("Draw Midline for FVG Rectangle. Requires Line Width of 1 or Higher."); Input_FVGDnDrawMidline.SetYesNo(0); Input_FVGDnExtendRight.Name = "FVG Down: Extend Right"; Input_FVGDnExtendRight.SetDescription("Extend FVG Rectangle to Right of Chart Until Filled"); Input_FVGDnExtendRight.SetYesNo(1); Input_FVGDnHideWhenFilled.Name = "FVG Down: Hide When Filled"; Input_FVGDnHideWhenFilled.SetDescription("Hide Rectangle when Gap is Filled"); Input_FVGDnHideWhenFilled.SetYesNo(1); Input_FVGDnAllowCopyToOtherCharts.Name = "FVG Down: Allow Copy To Other Charts"; Input_FVGDnAllowCopyToOtherCharts.SetDescription("Allow the FVG Rectangles to be Copied to Other Charts"); Input_FVGDnAllowCopyToOtherCharts.SetYesNo(1); Input_FVGDnMinGapSizeInTicks.Name = "FVG Down: Minimum Gap Size in Ticks"; Input_FVGDnMinGapSizeInTicks.SetDescription("Only Process Gaps if greater or equal to Specified Gap Size"); Input_FVGDnMinGapSizeInTicks.SetInt(1); Input_FVGDnMinGapSizeInTicks.SetIntLimits(1, INT_MAX); // General settings Input_FVGMaxBarLookback.Name = "Maximum Bar Lookback (0 = ALL)"; Input_FVGMaxBarLookback.SetDescription("This Sets the Maximum Number of Bars to Process"); Input_FVGMaxBarLookback.SetInt(400); Input_FVGMaxBarLookback.SetIntLimits(0, MAX_STUDY_LENGTH); // Tick Size for Subgraphs - For trailing stops/targets/etc... Input_SubgraphFVGUpMinGapSizeInTicks.Name = "Subgraph FVG Up: Minimum Gap Size in Ticks"; Input_SubgraphFVGUpMinGapSizeInTicks.SetDescription("Only Process Gaps if greater or equal to Specified Gap Size"); Input_SubgraphFVGUpMinGapSizeInTicks.SetInt(1); Input_SubgraphFVGUpMinGapSizeInTicks.SetIntLimits(1, INT_MAX); Input_SubgraphFVGDnMinGapSizeInTicks.Name = "Subgraph FVG Down: Minimum Gap Size in Ticks"; Input_SubgraphFVGDnMinGapSizeInTicks.SetDescription("Only Process Gaps if greater or equal to Specified Gap Size"); Input_SubgraphFVGDnMinGapSizeInTicks.SetInt(1); Input_SubgraphFVGDnMinGapSizeInTicks.SetIntLimits(1, INT_MAX); Input_UseAdditionalFVGCandleData.Name = "Use Additional Study Data for FVG"; Input_UseAdditionalFVGCandleData.SetDescription("When enabled this uses additional data to determine if FVG should be drawn"); Input_UseAdditionalFVGCandleData.SetYesNo(0); Input_AdditionalFVGCandleData.Name = "Additional Study Data for FVG [True/False Compare]"; Input_AdditionalFVGCandleData.SetDescription("This checks the result of the specified study at the same index as the candle that would create the FVG (middle candle). Non-Zero values are considered True. Zero is considered False. If True then the FVG is drawn. Otherwise it's ignored."); Input_AdditionalFVGCandleData.SetStudySubgraphValues(0, 0); // Subgraphs - FVG Counters sc.Subgraph[Subgraph::FVGUpCount].Name = "FVG Up Count"; sc.Subgraph[Subgraph::FVGUpCount].PrimaryColor = RGB(13, 166, 240); sc.Subgraph[Subgraph::FVGUpCount].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUpCount].DrawZeros = false; sc.Subgraph[Subgraph::FVGDnCount].Name = "FVG Down Count"; sc.Subgraph[Subgraph::FVGDnCount].PrimaryColor = RGB(255, 128, 128); sc.Subgraph[Subgraph::FVGDnCount].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDnCount].DrawZeros = false; // Subgraphs - FVG Ups #pragma region Subgraphs - FVG Ups sc.Subgraph[Subgraph::FVGUp_01_H].Name = "FVG Up 01 High"; sc.Subgraph[Subgraph::FVGUp_01_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_01_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_01_H].PrimaryColor = RGB(13, 166, 240); sc.Subgraph[Subgraph::FVGUp_01_L].Name = "FVG Up 01 Low"; sc.Subgraph[Subgraph::FVGUp_01_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_01_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_01_L].PrimaryColor = RGB(13, 166, 240); sc.Subgraph[Subgraph::FVGUp_02_H].Name = "FVG Up 02 High"; sc.Subgraph[Subgraph::FVGUp_02_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_02_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_02_H].PrimaryColor = RGB(31, 172, 230); sc.Subgraph[Subgraph::FVGUp_02_L].Name = "FVG Up 02 Low"; sc.Subgraph[Subgraph::FVGUp_02_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_02_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_02_L].PrimaryColor = RGB(31, 172, 230); sc.Subgraph[Subgraph::FVGUp_03_H].Name = "FVG Up 03 High"; sc.Subgraph[Subgraph::FVGUp_03_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_03_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_03_H].PrimaryColor = RGB(49, 179, 220); sc.Subgraph[Subgraph::FVGUp_03_L].Name = "FVG Up 03 Low"; sc.Subgraph[Subgraph::FVGUp_03_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_03_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_03_L].PrimaryColor = RGB(49, 179, 220); sc.Subgraph[Subgraph::FVGUp_04_H].Name = "FVG Up 04 High"; sc.Subgraph[Subgraph::FVGUp_04_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_04_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_04_H].PrimaryColor = RGB(68, 185, 210); sc.Subgraph[Subgraph::FVGUp_04_L].Name = "FVG Up 04 Low"; sc.Subgraph[Subgraph::FVGUp_04_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_04_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_04_L].PrimaryColor = RGB(68, 185, 210); sc.Subgraph[Subgraph::FVGUp_05_H].Name = "FVG Up 05 High"; sc.Subgraph[Subgraph::FVGUp_05_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_05_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_05_H].PrimaryColor = RGB(86, 192, 200); sc.Subgraph[Subgraph::FVGUp_05_L].Name = "FVG Up 05 Low"; sc.Subgraph[Subgraph::FVGUp_05_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_05_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_05_L].PrimaryColor = RGB(86, 192, 200); sc.Subgraph[Subgraph::FVGUp_06_H].Name = "FVG Up 06 High"; sc.Subgraph[Subgraph::FVGUp_06_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_06_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_06_H].PrimaryColor = RGB(104, 198, 190); sc.Subgraph[Subgraph::FVGUp_06_L].Name = "FVG Up 06 Low"; sc.Subgraph[Subgraph::FVGUp_06_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_06_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_06_L].PrimaryColor = RGB(104, 198, 190); sc.Subgraph[Subgraph::FVGUp_07_H].Name = "FVG Up 07 High"; sc.Subgraph[Subgraph::FVGUp_07_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_07_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_07_H].PrimaryColor = RGB(122, 205, 180); sc.Subgraph[Subgraph::FVGUp_07_L].Name = "FVG Up 07 Low"; sc.Subgraph[Subgraph::FVGUp_07_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_07_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_07_L].PrimaryColor = RGB(122, 205, 180); sc.Subgraph[Subgraph::FVGUp_08_H].Name = "FVG Up 08 High"; sc.Subgraph[Subgraph::FVGUp_08_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_08_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_08_H].PrimaryColor = RGB(141, 211, 170); sc.Subgraph[Subgraph::FVGUp_08_L].Name = "FVG Up 08 Low"; sc.Subgraph[Subgraph::FVGUp_08_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_08_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_08_L].PrimaryColor = RGB(141, 211, 170); sc.Subgraph[Subgraph::FVGUp_09_H].Name = "FVG Up 09 High"; sc.Subgraph[Subgraph::FVGUp_09_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_09_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_09_H].PrimaryColor = RGB(159, 218, 160); sc.Subgraph[Subgraph::FVGUp_09_L].Name = "FVG Up 09 Low"; sc.Subgraph[Subgraph::FVGUp_09_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_09_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_09_L].PrimaryColor = RGB(159, 218, 160); sc.Subgraph[Subgraph::FVGUp_10_H].Name = "FVG Up 10 High"; sc.Subgraph[Subgraph::FVGUp_10_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_10_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_10_H].PrimaryColor = RGB(177, 224, 150); sc.Subgraph[Subgraph::FVGUp_10_L].Name = "FVG Up 10 Low"; sc.Subgraph[Subgraph::FVGUp_10_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_10_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_10_L].PrimaryColor = RGB(177, 224, 150); sc.Subgraph[Subgraph::FVGUp_11_H].Name = "FVG Up 11 High"; sc.Subgraph[Subgraph::FVGUp_11_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_11_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_11_H].PrimaryColor = RGB(195, 231, 140); sc.Subgraph[Subgraph::FVGUp_11_L].Name = "FVG Up 11 Low"; sc.Subgraph[Subgraph::FVGUp_11_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_11_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_11_L].PrimaryColor = RGB(195, 231, 140); sc.Subgraph[Subgraph::FVGUp_12_H].Name = "FVG Up 12 High"; sc.Subgraph[Subgraph::FVGUp_12_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_12_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_12_H].PrimaryColor = RGB(214, 237, 130); sc.Subgraph[Subgraph::FVGUp_12_L].Name = "FVG Up 12 Low"; sc.Subgraph[Subgraph::FVGUp_12_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_12_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_12_L].PrimaryColor = RGB(214, 237, 130); sc.Subgraph[Subgraph::FVGUp_13_H].Name = "FVG Up 13 High"; sc.Subgraph[Subgraph::FVGUp_13_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_13_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_13_H].PrimaryColor = RGB(232, 244, 120); sc.Subgraph[Subgraph::FVGUp_13_L].Name = "FVG Up 13 Low"; sc.Subgraph[Subgraph::FVGUp_13_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_13_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_13_L].PrimaryColor = RGB(232, 244, 120); sc.Subgraph[Subgraph::FVGUp_14_H].Name = "FVG Up 14 High"; sc.Subgraph[Subgraph::FVGUp_14_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_14_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_14_H].PrimaryColor = RGB(250, 250, 110); sc.Subgraph[Subgraph::FVGUp_14_L].Name = "FVG Up 14 Low"; sc.Subgraph[Subgraph::FVGUp_14_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGUp_14_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGUp_14_L].PrimaryColor = RGB(250, 250, 110); #pragma endregion // Subgraphs - FVG Downs #pragma region Subgraphs - FVG Downs sc.Subgraph[Subgraph::FVGDn_01_H].Name = "FVG Down 01 High"; sc.Subgraph[Subgraph::FVGDn_01_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_01_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_01_H].PrimaryColor = RGB(255, 128, 128); sc.Subgraph[Subgraph::FVGDn_01_L].Name = "FVG Down 01 Low"; sc.Subgraph[Subgraph::FVGDn_01_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_01_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_01_L].PrimaryColor = RGB(255, 128, 128); sc.Subgraph[Subgraph::FVGDn_02_H].Name = "FVG Down 02 High"; sc.Subgraph[Subgraph::FVGDn_02_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_02_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_02_H].PrimaryColor = RGB(255, 137, 127); sc.Subgraph[Subgraph::FVGDn_02_L].Name = "FVG Down 02 Low"; sc.Subgraph[Subgraph::FVGDn_02_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_02_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_02_L].PrimaryColor = RGB(255, 137, 127); sc.Subgraph[Subgraph::FVGDn_03_H].Name = "FVG Down 03 High"; sc.Subgraph[Subgraph::FVGDn_03_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_03_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_03_H].PrimaryColor = RGB(254, 147, 125); sc.Subgraph[Subgraph::FVGDn_03_L].Name = "FVG Down 03 Low"; sc.Subgraph[Subgraph::FVGDn_03_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_03_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_03_L].PrimaryColor = RGB(254, 147, 125); sc.Subgraph[Subgraph::FVGDn_04_H].Name = "FVG Down 04 High"; sc.Subgraph[Subgraph::FVGDn_04_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_04_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_04_H].PrimaryColor = RGB(254, 156, 124); sc.Subgraph[Subgraph::FVGDn_04_L].Name = "FVG Down 04 Low"; sc.Subgraph[Subgraph::FVGDn_04_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_04_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_04_L].PrimaryColor = RGB(254, 156, 124); sc.Subgraph[Subgraph::FVGDn_05_H].Name = "FVG Down 05 High"; sc.Subgraph[Subgraph::FVGDn_05_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_05_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_05_H].PrimaryColor = RGB(253, 166, 122); sc.Subgraph[Subgraph::FVGDn_05_L].Name = "FVG Down 05 Low"; sc.Subgraph[Subgraph::FVGDn_05_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_05_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_05_L].PrimaryColor = RGB(253, 166, 122); sc.Subgraph[Subgraph::FVGDn_06_H].Name = "FVG Down 06 High"; sc.Subgraph[Subgraph::FVGDn_06_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_06_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_06_H].PrimaryColor = RGB(253, 175, 121); sc.Subgraph[Subgraph::FVGDn_06_L].Name = "FVG Down 06 Low"; sc.Subgraph[Subgraph::FVGDn_06_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_06_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_06_L].PrimaryColor = RGB(253, 175, 121); sc.Subgraph[Subgraph::FVGDn_07_H].Name = "FVG Down 07 High"; sc.Subgraph[Subgraph::FVGDn_07_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_07_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_07_H].PrimaryColor = RGB(253, 184, 120); sc.Subgraph[Subgraph::FVGDn_07_L].Name = "FVG Down 07 Low"; sc.Subgraph[Subgraph::FVGDn_07_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_07_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_07_L].PrimaryColor = RGB(253, 184, 120); sc.Subgraph[Subgraph::FVGDn_08_H].Name = "FVG Down 08 High"; sc.Subgraph[Subgraph::FVGDn_08_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_08_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_08_H].PrimaryColor = RGB(252, 194, 118); sc.Subgraph[Subgraph::FVGDn_08_L].Name = "FVG Down 08 Low"; sc.Subgraph[Subgraph::FVGDn_08_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_08_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_08_L].PrimaryColor = RGB(252, 194, 118); sc.Subgraph[Subgraph::FVGDn_09_H].Name = "FVG Down 09 High"; sc.Subgraph[Subgraph::FVGDn_09_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_09_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_09_H].PrimaryColor = RGB(252, 203, 117); sc.Subgraph[Subgraph::FVGDn_09_L].Name = "FVG Down 09 Low"; sc.Subgraph[Subgraph::FVGDn_09_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_09_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_09_L].PrimaryColor = RGB(252, 203, 117); sc.Subgraph[Subgraph::FVGDn_10_H].Name = "FVG Down 10 High"; sc.Subgraph[Subgraph::FVGDn_10_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_10_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_10_H].PrimaryColor = RGB(252, 212, 116); sc.Subgraph[Subgraph::FVGDn_10_L].Name = "FVG Down 10 Low"; sc.Subgraph[Subgraph::FVGDn_10_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_10_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_10_L].PrimaryColor = RGB(252, 212, 116); sc.Subgraph[Subgraph::FVGDn_11_H].Name = "FVG Down 11 High"; sc.Subgraph[Subgraph::FVGDn_11_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_11_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_11_H].PrimaryColor = RGB(251, 222, 114); sc.Subgraph[Subgraph::FVGDn_11_L].Name = "FVG Down 11 Low"; sc.Subgraph[Subgraph::FVGDn_11_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_11_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_11_L].PrimaryColor = RGB(251, 222, 114); sc.Subgraph[Subgraph::FVGDn_12_H].Name = "FVG Down 12 High"; sc.Subgraph[Subgraph::FVGDn_12_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_12_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_12_H].PrimaryColor = RGB(251, 231, 113); sc.Subgraph[Subgraph::FVGDn_12_L].Name = "FVG Down 12 Low"; sc.Subgraph[Subgraph::FVGDn_12_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_12_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_12_L].PrimaryColor = RGB(251, 231, 113); sc.Subgraph[Subgraph::FVGDn_13_H].Name = "FVG Down 13 High"; sc.Subgraph[Subgraph::FVGDn_13_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_13_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_13_H].PrimaryColor = RGB(250, 241, 111); sc.Subgraph[Subgraph::FVGDn_13_L].Name = "FVG Down 13 Low"; sc.Subgraph[Subgraph::FVGDn_13_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_13_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_13_L].PrimaryColor = RGB(250, 241, 111); sc.Subgraph[Subgraph::FVGDn_14_H].Name = "FVG Down 14 High"; sc.Subgraph[Subgraph::FVGDn_14_H].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_14_H].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_14_H].PrimaryColor = RGB(250, 250, 110); sc.Subgraph[Subgraph::FVGDn_14_L].Name = "FVG Down 14 Low"; sc.Subgraph[Subgraph::FVGDn_14_L].DrawStyle = DRAWSTYLE_IGNORE; sc.Subgraph[Subgraph::FVGDn_14_L].LineWidth = 1; sc.Subgraph[Subgraph::FVGDn_14_L].PrimaryColor = RGB(250, 250, 110); #pragma endregion return; } // See if we are capping max bars to check back if (Input_FVGMaxBarLookback.GetInt() == 0) sc.DataStartIndex = MIN_START_INDEX; // Need at least three bars to calculate else sc.DataStartIndex = sc.ArraySize - 1 - Input_FVGMaxBarLookback.GetInt() + MIN_START_INDEX; if (FVGRectangles == NULL) { // Array of FVGRectangle structs FVGRectangles = new std::vector; sc.SetPersistentPointer(0, FVGRectangles); } // A study will be fully calculated/recalculated when it is added to a chart, any time its Input settings are changed, // another study is added or removed from a chart, when the Study Window is closed with OK or the settings are applied. // Or under other conditions which can cause a full recalculation. if (sc.IsFullRecalculation || sc.LastCallToFunction || sc.HideStudy) { // On a full recalculation non-user drawn advanced custom study drawings are automatically deleted // So need to manually remove the User type drawings. Same with hiding study, if user type, need to manually remove them for (int i = 0; i < FVGRectangles->size(); i++) { if (FVGRectangles->at(i).AddAsUserDrawnDrawing) sc.DeleteUserDrawnACSDrawing(sc.ChartNumber, FVGRectangles->at(i).LineNumber); } // Drawings removed, now clear to avoid re-drawing them again FVGRectangles->clear(); // Study is being removed nothing more to do if (sc.LastCallToFunction || sc.HideStudy) return; } // Get line style for FVG types SubgraphLineStyles FVGUpLineStyle = (SubgraphLineStyles)Input_FVGUpLineStyle.GetIndex(); SubgraphLineStyles FVGDnLineStyle = (SubgraphLineStyles)Input_FVGDnLineStyle.GetIndex(); // Clear out structure to avoid contually adding onto it and causing memory/performance issues // TODO: Revist above logic. For now though we can't clear it until user type drawings are removed // first so have to do it after that point if (FVGRectangles != NULL) FVGRectangles->clear(); // Min Gap Tick Size for FVG's float FVGUpMinTickSize = float(Input_FVGUpMinGapSizeInTicks.GetInt()) * sc.TickSize; float FVGDnMinTickSize = float(Input_FVGDnMinGapSizeInTicks.GetInt()) * sc.TickSize; // Min Gap Tick Size for Subgraphs float SubgraphFVGUpMinTickSize = float(Input_SubgraphFVGUpMinGapSizeInTicks.GetInt()) * sc.TickSize; float SubgraphFVGDnMinTickSize = float(Input_SubgraphFVGDnMinGapSizeInTicks.GetInt()) * sc.TickSize; // Additional Candle Data SCFloatArray AdditionalFVGCandleData; // Loop through bars and process FVG's // 1 is the current bar that is closed // 3 is the 3rd bar back from current bar for (int BarIndex = sc.DataStartIndex; BarIndex < sc.ArraySize - 1; BarIndex++) { // Store HL for each bar index. May need to revisit to see if better way HLForBarIndex TmpHLForBarIndex = { BarIndex, sc.High[BarIndex], sc.Low[BarIndex] }; HLForBarIndexes.push_back(TmpHLForBarIndex); // Additional Data if (Input_UseAdditionalFVGCandleData.GetYesNo()) sc.GetStudyArrayUsingID(Input_AdditionalFVGCandleData.GetStudyID(), Input_AdditionalFVGCandleData.GetSubgraphIndex(), AdditionalFVGCandleData); // // H1, H3, L1, L3 logic borrowed from this indicator // https://www.tradingview.com/script/u8mKo7pb-muh-gap-FAIR-VALUE-GAP-FINDER/ float L1 = sc.Low[BarIndex]; float H1 = sc.High[BarIndex]; float L3 = sc.Low[BarIndex - 2]; float H3 = sc.High[BarIndex - 2]; bool FVGUp = (H3 < L1) && (L1 - H3 >= FVGUpMinTickSize); bool FVGDn = (L3 > H1) && (L3 - H1 >= FVGDnMinTickSize); if (Input_UseAdditionalFVGCandleData.GetYesNo()) { FVGUp = FVGUp && AdditionalFVGCandleData[BarIndex - 1]; FVGDn = FVGDn && AdditionalFVGCandleData[BarIndex - 1]; } // Store the FVG Up if (FVGUp && Input_FVGUpEnabled.GetYesNo()) { FVGRectangle TmpUpRect = { UniqueLineNumber + BarIndex, // Tool.LineNumber BarIndex - 2, // Tool.BeginIndex H3, // Tool.BeginValue BarIndex,// Tool.EndIndex L1, // Tool.EndValue false, // FVGEnded true, // FVGUp Input_FVGUpAllowCopyToOtherCharts.GetYesNo() // AddAsUserDrawnDrawing }; FVGRectangles->insert(FVGRectangles->end(), TmpUpRect); } // Store the FVG Dn if (FVGDn && Input_FVGDnEnabled.GetYesNo()) { FVGRectangle TmpDnRect = { UniqueLineNumber + BarIndex, // Tool.LineNumber BarIndex - 2, // Tool.BeginIndex L3, // Tool.BeginValue BarIndex,// Tool.EndIndex H1, // Tool.EndValue false, // FVGEnded false, // FVGUp Input_FVGDnAllowCopyToOtherCharts.GetYesNo() // AddAsUserDrawnDrawing }; FVGRectangles->insert(FVGRectangles->end(), TmpDnRect); } } // Count open FVG's for Up/Down int FVGUpCounter = 0; int FVGDnCounter = 0; // Subgraph offsets for counter int FVGUp_H_SubgraphOffset = 2; int FVGUp_L_SubgraphOffset = 3; int FVGDn_H_SubgraphOffset = 30; int FVGDn_L_SubgraphOffset = 31; for (int i = FVGRectangles->size() - 1; i >= 0; i--) { s_UseTool Tool; Tool.Clear(); Tool.ChartNumber = sc.ChartNumber; Tool.LineNumber = FVGRectangles->at(i).LineNumber; Tool.DrawingType = DRAWING_RECTANGLEHIGHLIGHT; Tool.AddMethod = UTAM_ADD_OR_ADJUST; Tool.BeginIndex = FVGRectangles->at(i).ToolBeginIndex; Tool.BeginValue = FVGRectangles->at(i).ToolBeginValue; Tool.EndIndex = FVGRectangles->at(i).ToolEndIndex; Tool.EndValue = FVGRectangles->at(i).ToolEndValue; if (FVGRectangles->at(i).FVGUp) { // FVG Up Tool.Color = Input_FVGUpLineColor.GetColor(); Tool.SecondaryColor = Input_FVGUpFillColor.GetColor(); Tool.LineWidth = Input_FVGUpLineWidth.GetInt(); Tool.LineStyle = FVGUpLineStyle; Tool.TransparencyLevel = Input_FVGUpTransparencyLevel.GetInt(); Tool.DrawMidline = Input_FVGUpDrawMidline.GetYesNo(); // If we want to allow this to show up on other charts, need to set it to user drawing Tool.AddAsUserDrawnDrawing = FVGRectangles->at(i).AddAsUserDrawnDrawing; Tool.AllowCopyToOtherCharts = FVGRectangles->at(i).AddAsUserDrawnDrawing; // In our High/Low Bar Index, check if we have an equal or lower Low than the FVG // If True, then this FVG will end at that index if extending Right auto it = find_if( HLForBarIndexes.begin(), HLForBarIndexes.end(), [=](HLForBarIndex& HLIndex) { return HLIndex.Index > FVGRectangles->at(i).ToolEndIndex && HLIndex.Low <= FVGRectangles->at(i).ToolBeginValue; } ); // If true, we have an end index for this FVG and it hasn't yet been flagged as ended if (it != HLForBarIndexes.end() && !FVGRectangles->at(i).FVGEnded) { // FVG has ended, so then see if we want to show it or not... if (Input_FVGUpHideWhenFilled.GetYesNo()) Tool.HideDrawing = 1; else Tool.HideDrawing = 0; // If here, we have an ending FVG that we want to show... Now need to see which EndIndex to use if (Input_FVGUpExtendRight.GetYesNo()) Tool.EndIndex = it->Index; // Extending, so show it based on where we found the equal/lower bar low index // Flag this as ended now FVGRectangles->at(i).FVGEnded = true; } else { // If here, the FVG has not ended, so set to last closed bar if extending if (Input_FVGUpExtendRight.GetYesNo()) Tool.EndIndex = sc.ArraySize - 1; } // Update Subgraphs bool IsSubgraphFVGUp = (FVGRectangles->at(i).ToolEndValue - FVGRectangles->at(i).ToolBeginValue) >= SubgraphFVGUpMinTickSize; bool FVGNotEnded = !FVGRectangles->at(i).FVGEnded; if (FVGNotEnded && IsSubgraphFVGUp) { FVGUpCounter++; sc.Subgraph[Subgraph::FVGUpCount][sc.ArraySize - 1] = (float)FVGUpCounter; if (FVGUpCounter == 1) { sc.Subgraph[Subgraph::FVGUp_01_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_01_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 2) { sc.Subgraph[Subgraph::FVGUp_02_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_02_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 3) { sc.Subgraph[Subgraph::FVGUp_03_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_03_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 4) { sc.Subgraph[Subgraph::FVGUp_04_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_04_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 5) { sc.Subgraph[Subgraph::FVGUp_05_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_05_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 6) { sc.Subgraph[Subgraph::FVGUp_06_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_06_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 7) { sc.Subgraph[Subgraph::FVGUp_07_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_07_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 8) { sc.Subgraph[Subgraph::FVGUp_08_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_08_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 9) { sc.Subgraph[Subgraph::FVGUp_09_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_09_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 10) { sc.Subgraph[Subgraph::FVGUp_10_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_10_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 11) { sc.Subgraph[Subgraph::FVGUp_11_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_11_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 12) { sc.Subgraph[Subgraph::FVGUp_12_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_12_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 13) { sc.Subgraph[Subgraph::FVGUp_13_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_13_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } else if (FVGUpCounter == 14) { sc.Subgraph[Subgraph::FVGUp_14_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; sc.Subgraph[Subgraph::FVGUp_14_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; } } } else { // FVG Down Tool.Color = Input_FVGDnLineColor.GetColor(); Tool.SecondaryColor = Input_FVGDnFillColor.GetColor(); Tool.LineWidth = Input_FVGDnLineWidth.GetInt(); Tool.LineStyle = FVGDnLineStyle; Tool.TransparencyLevel = Input_FVGDnTransparencyLevel.GetInt(); Tool.AddMethod = UTAM_ADD_OR_ADJUST; Tool.DrawMidline = Input_FVGDnDrawMidline.GetYesNo(); // If we want to allow this to show up on other charts, need to set it to user drawing Tool.AddAsUserDrawnDrawing = FVGRectangles->at(i).AddAsUserDrawnDrawing; Tool.AllowCopyToOtherCharts = FVGRectangles->at(i).AddAsUserDrawnDrawing; // In our High/Low Bar Index, check if we have an equal or higher High than the FVG // If True, then this FVG will end at that index if extending Right auto it = find_if( HLForBarIndexes.begin(), HLForBarIndexes.end(), [=](HLForBarIndex& HLIndex) { return HLIndex.Index > FVGRectangles->at(i).ToolEndIndex && HLIndex.High >= FVGRectangles->at(i).ToolBeginValue; } ); // If true, we have an end index for this FVG and it hasn't yet been flagged as ended if (it != HLForBarIndexes.end() && !FVGRectangles->at(i).FVGEnded) { // FVG has ended, so then see if we want to show it or not... if (Input_FVGDnHideWhenFilled.GetYesNo()) Tool.HideDrawing = 1; else Tool.HideDrawing = 0; // If here, we have an ending FVG that we want to show... Now need to see which EndIndex to use if (Input_FVGDnExtendRight.GetYesNo()) Tool.EndIndex = it->Index; // Extending, so show it based on where we found the equal/lower bar low index // Flag this as ended now FVGRectangles->at(i).FVGEnded = true; } else { // If here, the FVG has not ended, so set to last closed bar if extending if (Input_FVGDnExtendRight.GetYesNo()) Tool.EndIndex = sc.ArraySize - 1; } // Update Subgraphs bool IsSubgraphFVGDn = (FVGRectangles->at(i).ToolBeginValue - FVGRectangles->at(i).ToolEndValue) >= SubgraphFVGDnMinTickSize; bool FVGNotEnded = !FVGRectangles->at(i).FVGEnded; if (FVGNotEnded && IsSubgraphFVGDn) { FVGDnCounter++; sc.Subgraph[Subgraph::FVGDnCount][sc.ArraySize - 1] = (float)FVGDnCounter; if (FVGDnCounter == 1) { sc.Subgraph[Subgraph::FVGDn_01_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_01_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 2) { sc.Subgraph[Subgraph::FVGDn_02_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_02_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 3) { sc.Subgraph[Subgraph::FVGDn_03_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_03_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 4) { sc.Subgraph[Subgraph::FVGDn_04_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_04_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 5) { sc.Subgraph[Subgraph::FVGDn_05_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_05_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 6) { sc.Subgraph[Subgraph::FVGDn_06_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_06_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 7) { sc.Subgraph[Subgraph::FVGDn_07_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_07_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 8) { sc.Subgraph[Subgraph::FVGDn_08_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_08_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 9) { sc.Subgraph[Subgraph::FVGDn_09_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_09_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 10) { sc.Subgraph[Subgraph::FVGDn_10_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_10_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 11) { sc.Subgraph[Subgraph::FVGDn_11_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_11_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 12) { sc.Subgraph[Subgraph::FVGDn_12_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_12_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 13) { sc.Subgraph[Subgraph::FVGDn_13_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_13_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } else if (FVGDnCounter == 14) { sc.Subgraph[Subgraph::FVGDn_14_H][sc.ArraySize - 1] = FVGRectangles->at(i).ToolBeginValue; sc.Subgraph[Subgraph::FVGDn_14_L][sc.ArraySize - 1] = FVGRectangles->at(i).ToolEndValue; } } } sc.UseTool(Tool); } }